Delayed Locking; Key Fob Feedback; Personalizing the DIC (if equipped)- Page 5

5

E/M (English/Metric):

On the base DIC,

press to choose English or Metric units.
On uplevel DICs, press the  (Option)
button until UNITS appears. Press the 

(Set/Reset) button to choose English

or Metric units.

(Set/Reset)

(if equipped): Press to

set/reset certain functions and to turn
off/acknowledge DIC messages. 

(Gauges)

(if equipped): Press to

display battery and oil life. 

(Fuel)

(if equipped): Press to display

fuel range and average economy.

(Option

) (if equipped): Press to dis-

play English/Metric units, language, 
personalization, compass zone and
compass calibration.

Personalizing the DIC (if equipped)

Uplevel DICs can memorize selected
personalized settings for up to two 
drivers. (Some features are limited to a
single setting.) 
1. Place the vehicle in Park (P) and turn 

on the ignition.

2. Press the  (Option) button until 

PERSONAL PROGRAM is 
displayed.

3. Press the 

(Set/Reset) button 

to display instructions.

4. Press the  button to display 

programmable features. 

5. Press the 

button to change the

setting of each feature.

Your ignition key identifies you to the
vehicle.

Two keys can be programmed

for certain features that correspond to
each driver. To personalize a key:
1. From the Personal Program menu,

press the  (Option) button until 
PERSONALIZE KEY is displayed. 

2. Press the 

(Set/Reset) button until

YES is displayed.

3. Press the  button.
Personalization Features include:

Delayed Locking

— Delays locking

of the vehicle doors for up to five 
seconds after the last door is closed.
Two chimes will sound when the power
door lock switch or the Lock button on
the Remote Keyless Entry transmitter
is pressed when a door is open. To
program:
1. From the Personal Program menu,

press the  (Option) button until
DELAYED LOCKING is displayed. 

2. Press the 

(Set/Reset) button until

ON or OFF appears. 

3. Press the  button to select it. 
The ignition key must be removed for
the feature to work after programming. 

Key Fob Feedback

— Choose from Off

(no feedback), Lights (exterior lights
flash) or Lights and Horn when you
press the Remote Keyless Entry trans-
mitter (key fob) Lock button. To program:
1. From the Personal Program menu,

press the  (Option) button until 
FOB LOCK FEEDBACK is displayed.

2. Press the 

(Set/Reset) button until

the desired setting is displayed.

3. Press the  button to save the 

setting.