Steam and scalding liquids from a hot- Page 358

2007 Buick Lucerne Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

Seats and Restraint Systems
Features and Controls
Instrument Panel
Service and Appearance Care
background image

3. Remove the 3800 Series II V6 engine cover

shield to access the bleed valve.

3.1. Clean the area around the engine oil fill

tube and cap before removing. Twist
the oil fill tube, with cap attached,
counterclockwise and remove it.

3.2. Lift the engine cover shield at the front,

slide the catch tab out of the engine
bracket and remove the cover shield.

3.3. Put the oil fill tube, with cap attached, in

the valve cover oil fill hole until you are
ready to replace the cover shield.

4. After the engine

cools, open the
coolant air bleed
valve. There is one
bleed valve. It is
located on the
thermostat housing.

5. Fill the radiator with the proper DEX-COOL

®

coolant mixture, up to the base of the filler
neck. See

Engine Coolant on page 347

for more information about the proper coolant
mixture.
If you see a stream of coolant coming from an
air bleed valve, close the valve. Otherwise,
close the valve after the radiator is filled.

6. Rinse or wipe any spilled coolant from the

engine and the compartment.

358

Detailed Information for 2007 Buick Lucerne Owner Manual

Lists of information found in 2007 Buick Lucerne Owner Manual - Page 358

  • 3. Remove the 3800 Series II V6 engine cover shield to access the bleed valve.
  • 3.1.
  • 3.2.
  • 3.3.
  • 4. After the engine cools, open the coolant air bleed valve.
  • 5. Fill the radiator with the proper DEX-COOL ® coolant mixture, up to the base of the filler neck.
  • 6. Rinse or wipe any spilled coolant from the engine and the compartment.

Related Documents for 2007 Buick Lucerne Owner Manual