Steam and scalding liquids from a hot- Page 359

2007 Buick Lucerne Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

Seats and Restraint Systems
Features and Controls
Instrument Panel
Service and Appearance Care
background image

7. Replace the 3800 Series II V6 engine cover

shield.

7.1. Remove the oil fill tube, with cap

attached, from the valve cover.

7.2. Insert the catch tab on the cover shield

under the bracket on the engine.

7.3. Place the hole in the cover shield over

the hole in the valve cover. Install oil fill
tube and cap by twisting clockwise.

8. Then fill the coolant recovery tank to the

FULL COLD mark.

9. Put the cap back on the coolant recovery tank,

but leave the radiator pressure cap off.

10. Start the engine and let it run until you can

feel the upper radiator hose getting hot.
Watch out for the engine cooling fans.

11. By this time, the coolant level inside the

radiator filler neck may be lower. If the level is
lower, add more of the proper DEX-COOL

®

coolant mixture through the filler neck until the
level reaches the base of the filler neck.

12. Then replace the pressure cap. At any time

during this procedure if coolant begins to flow
out of the filler neck, reinstall the pressure
cap. Be sure the arrow on the pressure
cap lines up properly.

359

Detailed Information for 2007 Buick Lucerne Owner Manual

Lists of information found in 2007 Buick Lucerne Owner Manual - Page 359

  • 7. Replace the 3800 Series II V6 engine cover shield.
  • 7.1.
  • 7.2.
  • 7.3.
  • 8. Then fill the coolant recovery tank to the FULL COLD mark.
  • 9. Put the cap back on the coolant recovery tank, but leave the radiator pressure cap off.
  • 11. By this time, the coolant level inside the radiator filler neck may be lower.
  • 12. Then replace the pressure cap.

Related Documents for 2007 Buick Lucerne Owner Manual