Buick Lucerne Owner Manual - 2011- Page 337
2011 Buick lucerne User Manual
Table of Contents
Black plate (51,1)
Buick Lucerne Owner Manual - 2011
7. Locate the vertical headlamp aiming screws, which
are under the hood near each headlamp assembly.
The adjustment screw can be turned with a
Number 2 Phillips screwdriver.
8. Turn the vertical aiming screw until the headlamp
beam is aimed to the horizontal tape line. Turn it
clockwise or counterclockwise to raise or lower the
angle of the beam.
9. Make sure that the light from the headlamp is
positioned at the bottom edge of the horizontal
tape line. The lamp on the left (A) shows the
correct headlamp aim. The lamp on the right (B)
shows the incorrect headlamp aim.
10. Repeat Steps 7 through 9 for the opposite
headlamp.
6-51
Detailed Information for 2011 Buick lucerne User Manual
Lists of information found in 2011 Buick lucerne User Manual - Page 337
- 7. Locate the vertical headlamp aiming screws, which are under the hood near each headlamp assembly.
- 8. Turn the vertical aiming screw until the headlamp beam is aimed to the horizontal tape line.
- 9. Make sure that the light from the headlamp is positioned at the bottom edge of the horizontal tape line.
Related Documents for 2011 Buick lucerne User Manual
All trademarks are property of their respective owners. Tightrope
Interactive