Vehicle Care- Page 316

2015 Buick Regal Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

In Brief
Seats and Restraints
Instruments and Controls
Driving and Operating
Vehicle Care
background image

Black plate (69,1)

Buick Regal Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576024) - 2015 - CRC - 9/15/14

Vehicle Care

10-69

If a tire goes flat, avoid further tire
and wheel damage by driving slowly
to a level place. Turn on the hazard
warning flashers. See

Hazard

Warning Flashers on page 6-3

.

See

If a Tire Goes Flat on

page 10-62

for other important

safety warnings.

1. Remove the tire sealant and

compressor kit from its storage
location. See

Storing the Tire

Sealant and Compressor Kit on
page 10-71

.

2. Unwrap the air only hose (7) and

the power plug (8).

3. Place the kit on the ground.

Make sure the tire valve stem is
positioned close to the ground
so the hose will reach it.

4. Remove the tire valve stem cap

from the flat tire by turning it
counterclockwise.

5. Attach the air only hose (7) onto

the tire valve stem by turning it
clockwise until it is tight.

6. Plug the power plug (8) into the

accessory power outlet in the
vehicle. Unplug all items from
other accessory power outlets.
See

Power Outlets on page 5-5

.

If the vehicle has an accessory
power outlet, do not use the
cigarette lighter.

If the vehicle only has a cigarette
lighter, use the cigarette lighter.

Do not pinch the power plug
cord in the door or window.

7. Start the vehicle. The vehicle

must be running while using the
air compressor.

8. Press and turn the selector

switch (1) clockwise to the Air
Only position.

9. Press the on/off button (2) to

turn the compressor on.

The compressor will inflate the
tire with air only.

Detailed Information for 2015 Buick Regal Owner Manual

Lists of information found in 2015 Buick Regal Owner Manual - Page 316

  • 1. Remove the tire sealant and compressor kit from its storage location.
  • 2. Unwrap the air only hose (7) and the power plug (8).
  • 3. Place the kit on the ground.
  • 4. Remove the tire valve stem cap from the flat tire by turning it counterclockwise.
  • 5. Attach the air only hose (7) onto the tire valve stem by turning it clockwise until it is tight.
  • 6. Plug the power plug (8) into the accessory power outlet in the vehicle.
  • 7. Start the vehicle.
  • 8. Press and turn the selector switch (1) clockwise to the Air Only position.
  • 9. Press the on/off button (2) to turn the compressor on.