Sun Visors; Roof; Sunroof- Page 45

2017 Buick Regal Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

In Brief
Seats and Restraints
Instruments and Controls
Driving and Operating
Vehicle Care
background image

Buick Regal Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

9804381) - 2017 - crc - 8/30/16

44

Keys, Doors, and Windows

Press

Z

to activate the rear

window lockout switch. An indicator
light comes on when activated.

Press

Z

again to deactivate the

lockout switch.

If the indicator light flashes, the
feature may not be working properly.

Programming the Power
Windows

If the battery on the vehicle has
been recharged, disconnected, or is
not working, you will need to
reprogram each front power window
for the express-up feature to work.
Before reprogramming, replace or
recharge the vehicle's battery.

To program each front window:

1. Place the ignition in ACC/

ACCESSORY or ON/RUN,
or Retained Accessory
Power (RAP).

2. Press and hold the power

window switch until the window
is fully open.

3. Pull the power window switch

up until the window is fully
closed.

4. Continue holding the switch up

for approximately two seconds
after the window is completely
closed.

The window is now reprogrammed.
Repeat the process for the other
windows.

Sun Visors

Pull the sun visor down to block
glare. Detach the sun visor from the
center mount to pivot to the side
window or, if equipped, extend
along the rod.

Roof

Sunroof

If equipped, the sunroof only
operates when the ignition is in ON/
RUN or ACC/ACCESSORY or in
Retained Accessory Power (RAP).
See

Retained Accessory Power

(RAP)

0

173

.

Open/Close :

Press

e

(1) to the

first detent to open the sunroof.
Press

g

(1) to the first detent to

close.

Detailed Information for 2017 Buick Regal Owner Manual

Lists of information found in 2017 Buick Regal Owner Manual - Page 45

  • 1. Place the ignition in ACC/ ACCESSORY or ON/RUN, or Retained Accessory Power (RAP).
  • 2. Press and hold the power window switch until the window is fully open.
  • 3. Pull the power window switch up until the window is fully closed.
  • 4. Continue holding the switch up for approximately two seconds after the window is completely closed.