Keys, Doors, and Windows- Page 11

2022 Chevrolet colorado Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

02-Seats and Restraints_en_US
04-Instruments and Controls_en_US
08-Driving and Operating_en_US
Driving and Operating
09-Vehicle Care_en_US
Vehicle Care
background image

Chevrolet Colorado Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

15274222) - 2022 - CRC - 3/12/21

10

Keys, Doors, and Windows

Warning (Continued)

occur, resulting in severe injury or death.
Seek medical attention immediately if a
battery is swallowed.

{

Warning

To avoid personal injury, do not touch
metal surfaces on the RKE transmitter
when it has been exposed to extreme
heat. These surfaces can be hot to the
touch at temperatures above 59 °C
(138 °F).

Caution

When replacing the battery, do not touch
any of the circuitry on the transmitter.
Static from your body could damage the
transmitter.

Caution

Always replace the battery with the
correct type. Replacing the battery with
an incorrect type could potentially create

(Continued)

Caution (Continued)

a risk of battery explosion. Dispose of
used batteries according to instructions
and local laws. Do not attempt to burn,
crush, or cut the used battery, and avoid
exposing the battery to environments
with extremely low air pressures or high
temperatures.

Replace the battery in the transmitter soon
if the DIC displays REPLACE BATTERY IN
REMOTE KEY.

To replace the battery:

1. Separate and remove the back cover of

the transmitter with a flat, thin object,
such as a coin.

2. Press and slide the battery down toward

the pocket of the transmitter in the
direction of the key ring. Do not use a
metal object.

3. Remove the battery.
4. Insert the new battery, positive side

facing up. Replace with a CR2032 or
equivalent battery.

5. Push together the transmitter back cover

top side first, and then the bottom
toward the key ring.

Detailed Information for 2022 Chevrolet colorado Owner Manual

Lists of information found in 2022 Chevrolet colorado Owner Manual - Page 11

  • 1. Separate and remove the back cover of the transmitter with a flat, thin object, such as a coin.
  • 2. Press and slide the battery down toward the pocket of the transmitter in the direction of the key ring.
  • 3. Remove the battery.
  • 4. Insert the new battery, positive side facing up.
  • 5. Push together the transmitter back cover top side first, and then the bottom toward the key ring.