Vehicle Care; Front Position; Rear Position- Page 291

2022 Chevrolet colorado Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

02-Seats and Restraints_en_US
04-Instruments and Controls_en_US
08-Driving and Operating_en_US
Driving and Operating
09-Vehicle Care_en_US
Vehicle Care
background image

Chevrolet Colorado Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

15274222) - 2022 - CRC - 3/12/21

290

Vehicle Care

Front Position

ZR2 Models

4. For ZR2 Models, position the jack under

the control arm, as shown.

Front Position

All Except ZR2 Models

For all other Models, position the jack
under the vehicle, as shown.
If the flat tire is on the front of the
vehicle, position the jack on the
depression in the vehicle's frame, behind
the flat tire.

Rear Position

5. If the flat tire is on the rear, position the

jack under the rear axle about 5 cm
(2 in) inboard of the shock absorber
bracket.
Make sure that the jack head is
positioned so that the rear axle is resting
securely between the grooves that are
on the jack head.

{

Warning

Getting under a vehicle when it is lifted
on a jack is dangerous. If the vehicle slips
off the jack, you could be badly injured
or killed. Never get under a vehicle when
it is supported only by a jack.

{

Warning

Raising the vehicle with the jack
improperly positioned can damage the
vehicle and even make the vehicle fall. To
help avoid personal injury and vehicle
damage, be sure to fit the jack lift head
into the proper location before raising
the vehicle.

{

Warning

The jack has a feature to limit its travel
to prevent overextension. When the
height limit is reached, an increase in
resistance if felt when attempting to
raise the jack farther. Raising the jack
past the height limit can damage the jack
pin and cause the jack to lock into an

(Continued)

Detailed Information for 2022 Chevrolet colorado Owner Manual

Lists of information found in 2022 Chevrolet colorado Owner Manual - Page 291

  • 4. For ZR2 Models, position the jack under the control arm, as shown.
  • 5. If the flat tire is on the rear, position the jack under the rear axle about 5 cm (2 in) inboard of the shock absorber bracket.