Operation Manual; 5 Advanced Operation; 5.3.1 Input Path- Page 55

DBC Network Bridge 

Operation Manual

page 55

5 Advanced Operation

Figure 5.17  Input Path Window

5.3.1 Input Path

Starting from the 

Signal Path

 window, you can access the 

Input Path

 window (Figure 5.17) for any channel 

by clicking on either an input-select button or the Input Path icon (shown above) for the channel.

1. Input Selector

Choose which input channel to view by either pressing the blue or green input channel required or, pick an 
input from the drop-down box.

2. Input Meter

The switched input signal is sampled and displayed.

3. Input Select Switch

The signal that is input to each of the Input Processing Sections can be either the associated analog audio sig-
nal from the rear panel or the associated CobraNet input.

4. Input Processing Selection

Displays the DSP processes available to the selected input path. If the icons are colored, the processes are 
enabled. Click on the process box in order to edit its parameters.

5. Input Signal Fader, Muter, and Inverter

The output of each of the Input Processing Sections has a fader associated with it prior to the Matrix Mixer. In 
addition, the Input Processing Section has a muter and inverter.

6. Input Window Link

This button opens a further window (Figure 5.18) that displays all the input gain faders with level meters, mute, 
polarity and input select switches. It provides an overview of the Input Processing Section DSP processes that 
are enabled/disabled for the selected input channel.

7. Outputs

Controls the “mix” level or matrix level of that particular input to the various outputs available on the unit.

1

2

3

4

5

6

7

Figure 5.18  Input Window