TRAVERSE & EXTEND/RETRACT- Page 13

TRAVERSE & EXTEND/RETRACT

Move the Traverse, Extend/Retract handle
toward you to move the forks and carriage to the
right.  Move the handle away from you to move the
forks and carriage to the left.

The farther you move the handle the
faster the carriage, or forks, will move.

Make sure the load will clear the
platform.

PIVOT

Move the Pivot handle toward you to
pivot the forks counter clockwise.  Move
the handle away from you to pivot the
forks clockwise.

The farther you move the handle the
faster the forks will pivot.

Before you pivot a load, make certain it will not poke or
intrude into the operator area.

Traverse, Extend & Pivot

23   Traverse, Extend & Pivot

Traverse Override

Actuate the Traverse override switch while moving the
Traverse & Extend/Retract handle.

OVERRIDE SWITCHES

Traverse and Extend/Retract override switches are located
under the right-hand console.  Use these switches to get
the forks out of the rack in case of electrical malfunction.

Extend/Retract Override

Actuate both the Traverse and the Extend/Retract override
switchs while moving the Traverse & Extend/Retract handle.

Traverse, Extend & Pivot   24

CHECK YOUR DISPLAY

If any hydraulic function doesn't work, check the indicator
lights on the console display.

• The gates must be down.

• The palm interlock switch must be actuated.

• The proper set of foot interlock pedals must be actuated.

• Some service conditions may also prevent you from

operating your truck.