Be a Safe Driver
continued
31 Be a Safe Driver
continued
Be a Safe driver
continued
32
AVOID FALLS AND TIPOVERS
• Stay with your truck. Don't jump from a moving or
falling sit-down truck.
• Stay away from the edge of docks and ramps.
• Check that bridgeplates and dockboards are secure.
Be certain that either the trailer wheels are chocked
or the trailer is locked to the dock. Check capacities.
Be sure your truck, with load, isn't too heavy for
where you are driving.
• Make sure the load you are moving is stable. Spread
forks as far as you can and center the load. Insert
forks as far under the load as you can. Be even more
careful with long, high or wide loads. They can be
less
stable.
• Use forward tilt only when you have the load in a
rack, over a stack or close to the fl oor. Use minimum
fork tilt to pick up or place a load. When lifting or
lowering outside a rack, keep the mast vertical or
tilted back slightly.
• When moving loads on grades or ramps, drive with
forks pointed upgrade. Without a load, drive with
forks downgrade. Slow down. Don't turn on grades
or ramps. Don’t raise the mast while on a grade
or
ramp.
LEAVING YOUR TRUCK
• Stop your truck completely before getting off.
• Lower the forks to the fl oor. Turn the truck off or
disconnect the battery.
• Avoid parking on inclines. But if you must, block the
wheels of your truck.
WATCH OUT FOR OTHER PEOPLE
• Slow down. Yield or stop for pedestrians. Use your
horn when you come to a crosswalk or intersection.
• Be careful that you don't pin or crush someone.
For example: Never drive your truck toward anyone
standing in front of a fi xed object.
• Watch out for power unit swing.
• Never allow passengers on your truck.
• Keep others away from your truck while you're
working. Don't ever allow anyone on or under the
load or forks.
• Don't let anyone use your truck unless they are
trained and certifi ed.
• Never lift anyone with the forks unless they are
using an approved platform. Even then, use
extreme
caution:
• Use a securely attached and approved safety
platform.
• Make certain lifting mechanism is operating
properly.
• Have mast vertical (never tilt when elevated).
• Make certain the direction control lever is in neutral.
• Lift and lower slowly.
• Watch for overhead obstructions.
• Be sure you can see and hear the person being lifted.
• Never transport anyone on the platform from one
location to another.