Remote Advance ; 23 Remote ; Advance - Page 13

Remote Advance 

option

23 Remote 

Advance 

option

REMOTE ADVANCE

This optional feature allows you to control travel and braking with a wireless 
transceiver.
The transceiver module mounts to a custom glove and is removed from the glove for
charging.

Remote Advance 

option

   24

At the start of a shift, snap a charged transceiver into the glove and pair with the truck.

PAIRING PROCEDURE

•  Enter valid user code through the Access display keypad or InfoLink module.

•  Display shows the last paired transceiver

     •  If ID number displayed matches, enter “yes”
     •  Enter “no” to pair a different transceiver

•  Follow display prompts

     •  Press brake and horn buttons simultaneously and then release
     •  Press the Go button and then release

Note: 

 Pair the transceiver to the truck at initial power up. If the user code times out 

you will need to pair the transceiver again.

Horn 

Button

Low 

Battery

Light

Brake 

Button

Go Button

Event

Light

ID Number

Transceiver Module

Transceiver Glove

Green Status

Light

RF Tower

  Class 1      

Laser Sensor

Strobe

Class 2  

Laser Sensors

HOW TO USE

  Align the truck in the aisle and always check that the aisle ahead is 
  clear before pressing the Go Button.

• Go Button 

(active when the operator leaves the platform)

  Double press and hold the Go Button and the truck will travel power
   unit fi rst (an alert will sound and the strobe lights will fl ash). You may
   let go then simply press again to extend travel.

  Release the Go Button and the truck will brake to a controlled stop.

• Horn Button
 

Press to sound the horn.

• Brake Button
    

Press to stop the truck.

LASER OPERATION

When active, the laser sensors are designed to stop the truck if stationary 
objects are detected in the travel path. The lasers are not active when 
standing on the platform or using the forward/ reverse rockers on the 
control handle. 

Be alert to the area around you and don’t rely on the laser sensors 

to protect yourself and others. 

 The green light shows laser status.

GREEN STATUS LIGHT
• Light off: 

transceiver operation and lasers are not active.

• Light on: 

transceiver operation is ready to use and lasers are active.

• Light fl ashing slow: 

transceiver is out of range or event is detected.

• Light fl ashing fast: 

an object has been detected.

CHARGING THE TRANSCEIVER MODULE

Snap the wireless transceiver 
into the charger. 
LED on the charger will
indicate charge status.