Steering & Travel; 15 Steering ; Steering & Travel 16- Page 9

Steering & Travel

15 Steering 

& 

Travel

Steering & Travel   16

STEERING AT HIGH TRAVEL SPEED

When the travel speed switch is in the 
high travel speed position (     ), steering 
is set to 60˚ each way of center for smooth 
operation at higher travel speeds.

STEERING AT MANEUVER SPEED

When the travel speed switch is in the 
low travel speed position (     ), 90˚ of 
steering each way of center is available 
for maneuvering in confi ned spaces.

STEERING

You control steering by moving the control handle from side to side.

For example:  This picture shows the directions the truck can turn when the control 
handle is moved to the approximate position shown. 

STEERING WHILE WALKING OR COASTING

Anytime the operator is off the platform, steering is 
reduced to 15º each way of center.

Know the Hazards

POWER UNIT SWING

Be careful turning while traveling forks fi rst. The power
unit will swing wide in the opposite direction. Make 
sure you have clearance, and watch out for people in 
the area.

Keep your hands and feet in the operator area.

Warning:  

Never place objects anywhere on the operator

platform. They would be a trip hazard and could affect
truck speed and steering.

SLOW DOWN FOR SPILLS OR WET FLOORS

Powder or liquid spills can cause slippery fl oors. Slow
down or you could lose control of steering and braking. 
Be careful and allow for a longer stopping distance.

Don't run over objects on the fl oor.

Travel, power
unit fi rst

D

ir

ec

tio

n

of

 Tu

rn

Travel, 

forks fi rst

Dir

ec

tio

n

of T

urn