AVAILABLE FORK OR- Page 14

Fork Function

25   Fork Function

AVAILABLE FORK OR

HYDRAULIC FUNCTIONS

Raising and Lowering the forks plus Fork Tilt
are standard. You control these two functions with the
multi-function handle.

Your truck may also have accessory functions like Sideshift,
Carton Clamp or Push-Pull.  You control these functions
with the accessory control levers.

Use these hydraulic functions when you move, put away
or take down loads.

TILT

Fork Function   26

LIFT UP MULTI-FUNCTION

Select a function and lift the multi-function handle up.

The forks will raise or the forks will tilt up (mast will tilt
back), depending on which function you selected.

The further you lift the handle up, the faster the movement
will be.

NEUTRAL

You must have the control in neutral to select the Tilt
function.  Hold the orange button in until you move the
control and the mast starts to tilt.

Return the handle to neutral and you will be back in the
Raise/Lower function.

PUSH DOWN MULTI-FUNCTION

Select a function and push the multi-function handle down.

The forks will lower or the forks will tilt down (mast will
tilt forward), depending on which function you selected.

The further you push the handle down, the faster the
movement will be.

RAISE/LOWER

You are always in the Raise/Lower function unless you
select the Fork Tilt function.

SELECTING FORK TILT

Press the orange button on the multi-function handle to
select Fork Tilt.

Note:

• You are always in the Raise/Lower function when you

turn the truck on.

• You must have the handle in neutral to select Tilt.
• You must hold the orange button in until you move the

handle from neutral and the forks and mast start to tilt.