Never use a battery; without the block in- Page 9

Know the Hazards

BEFORE CONNECTING THE BATTERY

Make certain the block (Crown #77034) is bolted to the
back of the battery half of the connector.  Without that
block the Power Disconnect won't work.  In an emergency
you will not be able to cut power to the truck.

Emergency disconnect
lever will not work if
block #77034 isn't
bolted to the battery
half of the connector.

34

Never use a battery
without the block in
place.

Attach block #77034 to
Battery Connector

Use (2) 1/4 x 1-1/4
screws, lockwashers
& nuts.

ENTRY BAR

Keep your feet in the operator area and clear of entry bar.
If you put your foot on the entry bar while traveling, the
alarm will sound a warning and travel speed is limited to
2.4km/h 

(1.5 mph

).  Plugging is reduced.  Braking is not

affected.
Below 2.4km/h 

(1.5mph)

 the alarm will sound a warning

but travel speed, plugging and braking are not affected.

Power On & Off

KEY SWITCH

• Turn the key clockwise to the green dot

to turn the truck ON.

• When leaving the truck, turn the key back to the red dot

to to shut the truck OFF. 

POWER DISCONNECT

Push the Power Disconnect in the direction of the forks
to disconnect the battery and cut all power.

Always use the Power Disconnect any time the truck isn't
working right.  The key switch does not cut all power to
the truck.

Don't use the truck if it's not working right.  Report the
problem to your supervisor.

POWER-ON PEDAL

Step down on the right pedal.  If the key is turned ON,
the steering pump will start running and you can operate
the truck.

Note:

You must keep the power-on pedal down for power

steering to work.

15   Power On & Off

BATTERY CHARGE METER

The lighted bar shows how much charge is left in your
battery.  A flashing light will warn you that the battery is
getting low.  Two flashing lights mean you must have the
battery changed or recharged.

WARNING

Power On & Off   16