Operation Manual; Front Panel Navigation; Menu Tree- Page 10

XTi2 Series 

Power Amplifiers

Operation Manual

page 10

Front Panel Navigation

From the front panel, you can change settings for several of the amplifier’s integrated signal processing features: Input Y, 
Crossover Frequency, EQ, Delay, Limiting, and Stereo/Bridge-Mono. The Icons in the display illuminate to show which 
features are currently applied and turned on.

When you power-on the amplifier for the first time, the LCD screen displays “DSP OFF” (no DSP is applied). Subsequent 
power-ons display the preset that was active when you last shut off the amplifier.

The figure below shows the Menu Tree, which is the navigation path of options in the Menu. It shows how you navigate 
through the front panel and which settings are available from the front panel. For full access to all features, it is required that 
you hook up the amplifier via USB to a computer and run either HiQnet System Architect™ or Band Manager™ software. 
Both are available free via download from the following address: http://hiqnet.harmanpro.com.

Menu Tree

Navigating the LCD Screen Menu: Basics

To step through the Menu options, press the 

Sel, Next

 or 

Prev

 buttons as described in the menu tree above.  Icons 

illuminated at the top of the screen show which DSP functions are active with the current preset.

When you are modifying a preset, its icon flashes. You can scroll through its settings with the 

Prev

 and 

Next

 buttons. 

When you see the desired setting, select it by pressing Sel. Doing nothing returns you to the current preset after ten seconds.

In the LCD screen, if the Preset Icon is lit, the current preset is unchanged from its stored settings. If the Custom Icon is lit, 
the current preset has been changed from its stored settings.

CURRENT PRESET 

FLASHING “PRESET” 

TEXT 

FLASHING “PRESET” 

ICON 

Sel 

Sel 

Sel 

Next 

BRIDGE 

XOVER 

BRG SUBS 

SUB SYNTH 

USER PRESETS
        6-50

DSP OFF 

Next 

Next 

Next 

Next 

Next 

Next 

Next or Prev 

FLASHING “CONFIG” TEXT 

Y 

XOV 

EQ Ch. 1 

EQ Ch. 2 

DELAY Ch. 1 

DELAY Ch. 2 

LIM Ch. 1 

LIM Ch. 2 

STEREO/BRIDGE MONO 

BRIDGE 

STEREO 

Sel 

Sel 

Sel 

Sel 

Sel 

Sel 

Sel 

Sel 

Sel 

Next 

Prev 

Next 

Next 

Next 

Next 

Next 

Next 

Next 

CH1+CH2
INPUT Y
STEREO

OFF, 90 Hz, 100 Hz, 1200 Hz,
1500 Hz, 2000 Hz, 2-CH SUB,
CUSTOM

Sel 

    MENU TREE

Next 

Press 

Next

 to see 

each processor’s  
options, then press 

Sel 

to select an option. 

PRESETS 

(

TEXT 

on screen) 

DSP PROCESSES 

(

ICONS 

on screen) 

Doing nothing returns you to the 
CURRENT PRESET after a timeout delay. 

Sel

 > 

Sel

 > 

Next

 goes to presets. 

Sel

 > 

Next

 > 

Sel

 lets you  

configure the DSP processes. 

Starting from the CURRENT PRESET, 

Power-up 

Sel 

EQ IN

Prev 

Next 

Prev 

EQ OUT

EQ OUT

EQ IN

CURRENT, OFF, 50, 40, 30,
20,10, 9, 8, 7, 6, 5, 4, 3, 2, 1

CURRENT, OFF, 50, 40, 30,
20,10, 9, 8, 7, 6, 5, 4, 3, 2, 1

CURRENT, OFF, –0.5 dB, 
–1.0 dB, –1.5 dB... –40 dB

CURRENT, OFF, –0.5 dB, 
–1.0 dB, –1.5 dB... –40 dB