Steps - Page 264

264

5-5. Using the other interior features

■

Before programming HomeLink

®



During programming, it is possible 
that garage doors, gates, or other 
devices may operate. For this rea-
son, make sure that people and 
objects are clear of the garage door 
or other devices to prevent injury or 
other potential harm.



It is recommended that a new bat-
tery be placed in the remote control 
transmitter for more accurate pro-
gramming.



Garage door opener motors manu-
factured after 1995 may be 
equipped with rolling code protec-
tion. If this is the case, you may need 
a stepladder or other sturdy, safe 
device to reach the “Learn” or 
“Smart” button on the garage door 
opener motor.

■

Programming HomeLink

®

Steps 

1

 through 

3

 must be performed 

within 60 seconds, otherwise the indi-
cator light will stop flashing and pro-
gramming will not be able to be 
completed.

1

Press and release the HomeLink

®

button you want to program and 
check that the HomeLink

®

 indica-

tor light flashes (orange).

2

Point the remote control transmit-
ter for the device at the rear view 
mirror, 1 to 3 in. (25 to 75 mm) 
from the HomeLink

®

 buttons.

Keep the HomeLink

®

 indicator light in 

view while programming.

3

Program a device.



Programming a device other than 
an entry gate (for U.S.A. owners)

Press and hold the handheld transmit-

WARNING

■

Conforming to federal safety stan-

dards

Do not use the HomeLink

®

 compatible 

transceiver with any garage door opener 

or device that lacks safety stop and 

reverse features as required by federal 

safety standards.
This includes any garage door that can-

not detect an interfering object. A door 

or device without these features 

increases the risk of death or serious 

injury.

■

When operating or programming 

HomeLink

®

Never allow a child to operate or play 

with the HomeLink

®

 buttons.

Programming the HomeLink

®