Driving Your Mazda; Indicator Light; 4x4 Indicator Light*- Page 199

Driving Your Mazda

5-63

These temporary malfunctions can be
corrected by filling the fuel tank with
good quality fuel and/or properly tight-
ening the gas cap. After three driving
cycles without these or any other tempo-
rary malfunctions present, the malfunc-
tion indicator light should turn off. (A
driving cycle consists of a cold engine
startup followed by mixed city/highway
driving.) No additional vehicle service is
required.

If the malfunction indicator light remains
on, have your vehicle serviced at the first
available opportunity.

If the check engine light is blinking:

Engine misfire is occurring which could
damage your catalytic converter. You
should drive in a moderate fashion (avoid
heavy acceleration and deceleration) and
have your vehicle serviced at the first
available opportunity.

J

Headlight High-Beam
Indicator Light

This light indicates one of two things:

S

The high-beam headlights are on;

S

The turn-signal lever is in the flash-
to-pass position.

J

4x4 Indicator Light*

The 4x4 indicator light comes on when
4x4 HIGH is activated.

If this light flashes, it indicates that
there is a malfunction in the 4x4 system
and you should take your vehicle in for
service.

J

4x4 LOW Indicator
Light*

The 4x4 LOW indicator light comes on
when 4x4 LOW is activated.

If this light flashes, it indicates that
there is a malfunction in the 4x4 system
and you should take your vehicle in for
service.

*Some models.