Roadside Emergencies; Lug nut socket; Wheel lug nut torque*- Page 181

2006 Mazda B4000 Truck B Series Truck Owners Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

background image

JOBNAME: No Job Name PAGE: 181 SESS: 1 OUTPUT: Thu Sep 15 08:22:27 2005
/ford_pdm/ford/own2002/mbs/og

1. Lay the tire on the ground with the valve stem facing up.

2. Slide the wheel partially under the vehicle and install the wire and

retainer through the center of the wheel.

3. Turn the jack handle clockwise until the tire is raised to its original

position underneath the vehicle. The effort to turn the jack handle
increases significantly as the tire contacts the frame. The spare tire
carrier will ratchet when the tire is in the fully stowed position. The
spare tire carrier has a built-in ratchet feature that will not allow you
to overtighten. If the spare tire carrier ratchets with very little effort,
take the vehicle to your authorized dealer for assistance at your
earliest convenience.

4. Check that the tire lies flat against the frame assembly. Push against

the tire to make sure it is tightly seated under the vehicle. Loosen
and retighten, if necessary. Failure to properly stow the spare tire
may result in failure of the winch cable and loss of the spare tire.

5. Repeat this tightness check procedure when servicing the spare tire

pressure (every six months, per

Service Maintenance Section),

or

at any time that the spare tire is disturbed through service of other
components.

6. Install the spare tire lock (if equipped) into the access hole above

the rear bumper with the spare tire lock key (if equipped) and jack
handle.

WHEEL LUG NUT TORQUE SPECIFICATIONS

Retighten the lug nuts to the specified torque at 50–100 miles (80–160
km) after any wheel disturbance (rotation, flat tire, wheel removal, etc.).

Lug nut socket

size/Bolt size

Wheel lug nut torque*

lb.ft.

N

m

Lug nut socket size:

3

4

” (19 mm) hex

Bolt size:

1

2

x 20

100

135

* Torque specifications are for nut and bolt threads free of dirt and
rust. Use only Mazda recommended replacement fasteners.

CIMS #1244586

com_lug-nut-torque.p150

itdseq=223

REVIEW COPY ——
2006 B-Series (mbs), Owners Guide (post-2002-fmt) (own2002)Market: USA (fus)

PAGE: 181 OP: root EDIT SESSION: DATE: SEPT 15 2005 at 8:22 JOB: @ibm2/ford_pdm/CLS_ford/GRP_own2002/JOB_mbs/DIV_og

Roadside Emergencies

181

Detailed Information for 2006 Mazda B4000 Truck B Series Truck Owners Manual

Lists of information found in 2006 Mazda B4000 Truck B Series Truck Owners Manual - Page 181

  • 1. Lay the tire on the ground with the valve stem facing up.
  • 2. Slide the wheel partially under the vehicle and install the wire and retainer through the center of the wheel.
  • 3. Turn the jack handle clockwise until the tire is raised to its original position underneath the vehicle.
  • 4. Check that the tire lies flat against the frame assembly.
  • 5. Repeat this tightness check procedure when servicing the spare tire pressure (every six months, per Service Maintenance Section), or at any time that the spare tire is disturbed through service of other components.
  • 6. Install the spare tire lock (if equipped) into the access hole above the rear bumper with the spare tire lock key (if equipped) and jack handle.
  • m Lug nut socket size: 3 ⁄ 4 ” (19 mm) hex Bolt size: 1 ⁄ 2 x 20 100 135 * Torque specifications are for nut and bolt threads free of dirt and rust.

Related Documents for 2006 Mazda B4000 Truck B Series Truck Owners Manual