Replacing Exterior Light Bulbs; Owner Maintenance; Never touch the glass portion of a halogen- Page 473

2021 Mazda CX-3 Cx 3 Owners Manual

Table of Contents

When Driving
Interior Features
Customer Information and Reporting Safety Defects
background image

WARNING

Never touch the glass portion of a halogen
bulb with your bare hands and always
wear eye protection when handling or
working around the bulbs:

When a halogen bulb breaks, it is
dangerous. These bulbs contain
pressurized gas. If one is broken, it will
explode and serious injuries could be
caused by the flying glass.
If the glass portion is touched with bare
hands, body oil could cause the bulb to
overheat and explode when lit.

Always keep halogen bulbs out of the reach
of children:

Playing with a halogen bulb is dangerous.
Serious injuries could be caused by
dropping a halogen bulb or breaking it
some other way.

CAUTION

When removing the lens or lamp unit using
a flathead screwdriver, make sure that the
flathead screwdriver does not contact the
interior terminal. If the flathead screwdriver
contacts the terminal, a short circuit may
occur.

NOTE

To replace the bulb, contact an
Authorized Mazda Dealer.

If the halogen bulb is accidentally
touched, it should be cleaned with
rubbing alcohol before being used.

Use the protective cover and carton for
the replacement bulb to dispose of the
old bulb promptly and out of the reach
of children.

Replacing Exterior Light Bulbs

Headlights (With LED headlights)

The LED bulb cannot be replaced as a
single unit because it is an integrated unit.
The LED bulb has to be replaced with the
unit. We recommend an Authorized
Mazda Dealer when the replacement is
necessary.

Headlights/Daytime running lights
(With halogen headlights)

High-beams bulbs/Daytime running
lights

1. Make sure the ignition is switched off,

and the headlight switch is off.

2. Lift the hood.
3. Disconnect the connector from the unit

by pressing the tab on the connector
with your finger and pulling the
connector downward.
 

4. Turn the socket and bulb assembly to

remove it. Carefully remove the bulb
from its socket in the reflector by

Maintenance and Care

Owner Maintenance

6-41

CX-3_8JL1-EA-20G_Edition1_old

2020-5-22 15:31:00

Detailed Information for 2021 Mazda CX-3 Cx 3 Owners Manual

Lists of information found in 2021 Mazda CX-3 Cx 3 Owners Manual - Page 473

  • 1. Make sure the ignition is switched off, and the headlight switch is off.
  • 2. Lift the hood.
  • 3. Disconnect the connector from the unit by pressing the tab on the connector with your finger and pulling the connector downward.
  • 4. Turn the socket and bulb assembly to remove it.