Replacing Interior Light Bulbs; Owner Maintenance; Reverse lights (Bulb type)- Page 477

Reverse lights (Bulb type)

1. Make sure the ignition is switched off,

and the headlight switch is off.

2. Remove the cover.

3. Turn the socket and bulb assembly

counterclockwise and remove it.

4. Disconnect the bulb from the socket.

5. Install the new bulb in the reverse

order of the removal procedure.

License plate lights

1. Make sure the ignition is switched off,

and the headlight switch is off.

2. Remove the cover.

3. Turn the socket and bulb assembly

counterclockwise and remove it.
 

4. Disconnect the bulb from the socket.
5. Install the new bulb in the reverse

order of the removal procedure.

▼

Replacing Interior Light Bulbs

Overhead lights (Front)/Map lights,
Overhead lights (Rear)

1. Wrap a small flathead screwdriver with

a soft cloth to prevent damage to the
lens, and then remove the lens by
carefully prying on the edge of the lens
with the flathead screwdriver.

2. Disconnect the bulb by pulling it out.

Maintenance and Care

Owner Maintenance

6-45

CX-3_8JL1-EA-20G_Edition1_old

2020-5-22 15:31:00