Owner Maintenance; Parking lights/Daytime running lights/; Front side-marker lights (With LED- Page 474

2021 Mazda CX-3 Cx 3 Owners Manual

Table of Contents

When Driving
Interior Features
Customer Information and Reporting Safety Defects
background image

gently pulling it straight backward out
of the socket.
 

5. Install the new bulb in the reverse

order of the removal procedure.

Low-beam bulbs

1. Make sure the ignition is switched off,

and the headlight switch is off.

2. Lift the hood.
3. Disconnect the connector from the unit

by pressing the tab on the connector
with your finger and pulling the
connector downward.
 

4. Turn the socket and bulb assembly to

remove it. Carefully remove the bulb
from its socket in the reflector by

gently pulling it straight backward out
of the socket.
 

5. Install the new bulb in the reverse

order of the removal procedure.

Parking lights/Daytime running lights/
Front side-marker lights (With LED
headlights)

The LED bulb cannot be replaced as a
single unit because it is an integrated unit.
The LED bulb has to be replaced with the
unit. We recommend an Authorized
Mazda Dealer when the replacement is
necessary.

Parking lights/Front side-marker lights
(With halogen headlights)

1. Make sure the ignition is switched off,

and the headlight switch is off.

2. Turn the socket and bulb assembly

counterclockwise and remove it.

Maintenance and Care

Owner Maintenance

6-42

CX-3_8JL1-EA-20G_Edition1_old

2020-5-22 15:31:00

Detailed Information for 2021 Mazda CX-3 Cx 3 Owners Manual

Lists of information found in 2021 Mazda CX-3 Cx 3 Owners Manual - Page 474

  • 5. Install the new bulb in the reverse order of the removal procedure.
  • 1. Make sure the ignition is switched off, and the headlight switch is off.
  • 2. Lift the hood.
  • 3. Disconnect the connector from the unit by pressing the tab on the connector with your finger and pulling the connector downward.
  • 4. Turn the socket and bulb assembly to remove it.
  • 5. Install the new bulb in the reverse order of the removal procedure.
  • 1. Make sure the ignition is switched off, and the headlight switch is off.
  • 2. Turn the socket and bulb assembly counterclockwise and remove it.