Power Moonroof Reset Procedure; Jam-safe Moonroof; Before Driving- Page 116

To stop sliding partway, press the tilt/slide
switch.

Close

Open

▼

Power Moonroof Reset Procedure

If the battery is disconnected, the
moonroof will not operate. The moonroof
will not operate correctly until it is reset.
Carry out the following procedure to reset
the moonroof and resume operation:
1. Switch the ignition ON.
2. Press the tilt switch, to partially tilt

open the rear of the moonroof.

3. Repeat Step 2. The rear of the

moonroof tilts open to the fully open
position, then closes a little.

NOTE

If the reset procedure is performed while
the moonroof is in the slide position
(partially open) it will close before the
rear tilt opens.

▼

Jam-safe Moonroof

If a person's hands, head or an object
blocks the moonroof while it is closing,
the moonroof will stop and move in the
open direction.

WARNING

Make sure nothing blocks the moonroof
just before it reaches the fully closed
position:

Blocking the moonroof just before it
reaches the closed position is dangerous.
In this case, the jam-safe function cannot
prevent the moonroof from closing. If
fingers are caught, serious injuries could
occur.

NOTE



Depending on driving conditions, a
closing moonroof could stop and start
opening when the moonroof feels a
shock that is similar to something
blocking it.



The moonroof's jam-safe function does
not work until initialization is finished.

▼

Sunshade

The sunshade can be opened and closed by
hand.
 
The sunshade opens at the same time as
the moonroof slides open, but it must be
closed by hand.

S

u

nshade

CAUTION



The sunshade does not tilt. To avoid
damaging the sunshade, do not push it
up.

Before Driving

Windows

3-40

CX-5_8FN1-EA-16L_Edition2

2017-2-9 12:40:26