Essential Safety Equipment; Programming using a button on; the side of the seat- Page 22



If the vehicle has been serviced and the
battery cables disconnected, the
programmed seat positions will have
been erased. Re-program the seat
positions.

Programming

1. Make sure the parking brake is on.
2.

(Automatic transaxle)

Make sure the selector lever is in the P
position.

3. Start the engine.
4. Adjust the seat and the active driving

display to the desired driving position.

5. Press the SET button on the seat until a

beep sound is heard one time.

6. Perform one of the following settings

within 5 seconds of completing step 5
above:



Programming using a button on
the side of the seat

Press the button you want to
program, either button 1 or 2, until a
beep sound is heard one time.



Programming using the key

Press the key   button until a beep
sound is heard one time.

NOTE

If a beep sound is heard three times, the
operation is canceled.

To move the driving position to a
programmed position

(Using a button on the side of the seat)

1. Make sure the parking brake is on.
2.

(Automatic transaxle)

Make sure the selector lever is in the P
position.

3. Start the engine.

4. Press the programming button for the

driving position you want to call up
(button 1 or 2).

5. A beep sound is heard when the

driving position adjustment is
completed.

NOTE



If the driving position movement is not
changed, only the beep sounds.



A seat position can be called up even
with the engine not running.



The driving position adjustment is
canceled in the following cases:



Any of the seat adjustment switches is
operated.



The SET button is pressed.



Programming button 1 or 2 is pressed.



The key   button or   button is
operated.



The vehicle starts moving.



The active driving display is adjusted.

(Using a programmed key)

1. Unlock the doors by pressing a request

switch or the key   button.

2. After unlocking the doors, the seat

position adjustment begins within 40
seconds of opening the driver's door,
and a beep sounds when the operation
is finished.

3. Make sure the parking brake is on.
4.

(Automatic transaxle)

Make sure the selector lever is in the P
position.

5. Start the engine.
6. The active driving display adjustment

begins.

Essential Safety Equipment

Seats

2-8

CX-5_8FN1-EA-16L_Edition2

2017-2-9 12:40:26