When Driving; Vehicle lane line display- Page 273

The Lane-keep Assist System (LAS) &
Lane Departure Warning System (LDWS)
goes on stand-by status in the following
cases:



The system cannot detect white (yellow)
lane lines.



The vehicle speed is less than about 60
km/h (37 mph).



The vehicle is making a sharp curve.



The vehicle is making a curve at an
inappropriate speed.

NOTE



The Lane-keep Assist System (LAS) &
Lane Departure Warning System
(LDWS) remains on stand-by until it
detects white (yellow) lines on both the
left and right sides, or on either side.



When the system detects a white
(yellow) lane line on one side only, the
system will not activate warnings for the
lane line on the side that is not being
detected.



The distance and warning sensitivity
(likelihood of a warning) which the
system uses to determine the possibility
of a lane departure can be changed.
Refer to Setting Change
(Personalization Features) on page 9-
10.

Vehicle lane line display

When the Lane-keep Assist System (LAS)
& Lane Departure Warning System
(LDWS) becomes operational while on
standby, the vehicle lane lines are
displayed in the multi-information display.
The system changes to operational status
display when the system detects a white
(yellow) line on either the left or right.

(Stand-by status)

(Operational status)

Auto cancel

In the following cases, the Lane-keep
Assist System (LAS) & Lane Departure
Warning System (LDWS) is automatically
canceled, the Lane-keep Assist System
(LAS) & Lane Departure Warning System
(LDWS) warning indication (amber) turns
on, and an alert is displayed. When the
Lane-keep Assist System (LAS) & Lane
Departure Warning System (LDWS)
become operational, the system turns back
on automatically.



The temperature inside the camera is
high or low.



The windshield around the camera is
foggy.



The windshield around the camera is
blocked by an obstruction, causing poor
forward visibility.

When Driving

i-ACTIVSENSE

4-135

CX-5_8FN1-EA-16L_Edition2

2017-2-9 12:40:26