Interior Features; Pairing a Bluetooth; which does not have a four-digit PIN- Page 349



If the pairing failed, “Err” flashes
for three seconds.



Pairing cannot be performed while
the vehicle is moving. If you attempt
to perform pairing while the vehicle
is moving, “PAIR DISABLE” is
displayed.



If seven Bluetooth

®

 audio devices

have already been paired to the
vehicle, pairing cannot be performed
and “MEMORY FULL” is
displayed. Delete one paired device
to pair another one.

Pairing a Bluetooth

®

 audio device

which does not have a four-digit PIN
code

1. Using the audio control dial, select the

pairing mode “PAIR DEVICE” in the
“BT SETUP” mode. (Refer to
“Bluetooth

®

 audio set up” for details.)

2. Press the audio control dial to

determine the mode. After “ENTER
PIN” is displayed on the audio display
for three seconds, “PIN 0000” is
displayed and the PIN code can be
input.

3. Press the audio control dial while “PIN

0000” is displayed. “PAIRING”
flashes on the audio display.

4. Operate the Bluetooth

®

 audio device

and set it to the pairing mode while
“PAIRING” is flashing.

5. As the Bluetooth

®

 audio device

requires a PIN code, input “0000”.

6. When the pairing is completed,   and

“PAIR SUCCESS” are displayed after
about 10-30 seconds, after which
“PAIR SUCCESS” continues to be
displayed for three seconds, and then
the unit returns to the normal display.

NOTE



If pairing cannot be completed, try
“1234” instead. Refer to the owner's
manual of your mobile device for the
right PIN code.



Some Bluetooth

®

 audio devices need

a certain amount of time before the 
symbol is displayed.



If the pairing failed, “Err” flashes
for three seconds.



Pairing cannot be performed while
the vehicle is moving. If you attempt
to perform pairing while the vehicle
is moving, “PAIR DISABLE” is
displayed.



If seven Bluetooth

®

 audio devices

have already been paired to the
vehicle, pairing cannot be performed
and “MEMORY FULL” is
displayed. Delete one paired device
to pair another one.

▼

Device selection (Bluetooth

®

 Audio)

If several devices have been paired, the
Bluetooth

®

 unit links the device last

paired. If you would like to link a different
paired device, it is necessary to change the
link. The order of device priority after the
link has been changed is maintained even
when the ignition is switched off.
1. Using the audio control dial, select the

link change mode “LINK CHANGE”
in the “BT SETUP” mode. (Refer to
“Bluetooth

®

 audio device set-up” for

details.)

2. Press the audio control dial to

determine the mode.

Interior Features

Audio Set [Type A (non-touchscreen)]

5-39

CX-5_8FN1-EA-16L_Edition2

2017-2-9 12:40:26