Available Settings; Active Driving Display; Personalization Features- Page 619

Item

Feature

Factory

Setting

Available Settings

Settings

Change
Method

Active Driving Display

 (page 4-27)

Display

Setting can be changed so that the Active
Driving Display is not displayed.

On

On/Off

C

―

The display height (up/down position)
can be changed.

0

13 steps up/down

from initial setting

(total: 27 steps)

C

―

The method for adjusting the display
brightness (automatically/manually) can
be changed.

AUTO

AUTO/MANUAL

C

―

The standard brightness while automatic
adjustment is selected can be changed us-
ing the brightness adjustment.

0

2 steps up/down from
initial setting (total: 5

steps)

C

―

The standard brightness while manual
adjustment is selected can be changed us-
ing the brightness adjustment.

0

20 steps up/down

from initial setting

(total: 41 steps)

C

―

The display angle can be changed.

0

3steps up/down from

initial setting (total:

7steps)

C

―

Navigation guidance

Display/non-display

On

On/Off

C

―

*

1 Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda

recommends that these systems remain On.

*

2 Only the volume of the warning beep during Blind Spot Monitoring (BSM) operation can be changed. The

volume of the warning beep during Rear Cross Traffic Alert (RCTA) operation cannot be changed.

*

3 This system functions only when the navigation system is functioning.

*

4 If the auto-wiper control is set to Off, the wiper lever 

 position is set to intermittent operation.

*

5 If the setting is changed to Off, the following operation is performed according to the headlight switch

position:



At 

 position: Headlights turn off immediately after the ignition is switched off.



At any position other than 

: Headlights on/off conditions vary according to the headlight switch

position. Refer to Headlights on page 4-47.

*

6 When set to Off, the lights-on reminder is operable.

*

7 The lights-on reminder settings can be changed at anytime, however, the lights-on reminder only operates

when the auto headlight function is set to Off. Refer to Lights-On Reminder on page 7-40.

*

8 The operation may stop in 15 minutes due to the effect of the outside temperature even if the operation time of

the rear window defogger has been changed to Continuous.

*

9 Available only in display from the center display.

Specifications

Personalization Features

9-15

CX-5_8FN1-EA-16L_Edition2

2017-2-9 12:40:26