

3–40
Before Driving
Windows
Slide Operation
    To  fully  open  automatically,  momentarily 
press the tilt/slide switch in the backward 
direction.
  To stop sliding partway, press the tilt/slide 
switch.
  To close to the desired position, press the 
tilt/slide switch in the forward direction.
Close
Open
Power Moonroof Reset Procedure
    If the battery is disconnected, the 
moonroof will not operate. The moonroof 
will not operate correctly until it is reset. 
Carry out the following procedure to reset 
the moonroof and resume operation:
   1.   Switch  the  ignition  ON.
   2.   Press the tilt switch, to partially tilt 
open the rear of the moonroof.
3. Repeat Step 2. The rear of the
moonroof tilts open to the fully open 
position, then closes a little.
NOTE
  If the reset procedure is performed while 
the moonroof is in the slide position 
(partially open) it will close before the 
rear tilt opens.
Sunshade
            The  sunshade  can  be  opened  and  closed 
by hand.
  The sunshade opens automatically when 
the moonroof is opened, but must be 
closed by hand.
Sunshade
CAUTION
¾
The sunshade does not tilt. To avoid
damaging the sunshade, do not push up 
on it.
¾
Do not close the sunshade while the
moonroof is opening. Trying to force the 
sunshade closed could damage it.