Interior Features; has a four-digit PIN code- Page 343

5–85

Interior Features

Bluetooth

®

   NOTE

y

  If a Bluetooth 

®

  device has already been 

paired to the vehicle as a hands-free 
mobile phone, it does not need to be 
paired again when using the device as 
a Bluetooth 

®

  audio device. Conversely, 

it does not need to be paired again as 
a hands-free mobile phone if it has 
already been paired as a Bluetooth 

®

audio device.

y

  Device registration can also be done 

using voice recognition.

  Concerning the operation of a Bluetooth 

®

audio device itself, refer to its instruction 
manual.
  Some  Bluetooth 

®

  audio devices have PIN 

codes (four digits). Refer to the audio 
device's instruction manual because the 
pairing procedure differs depending on 
whether it has a PIN code or not.

  Pairing  a  Bluetooth 

®

  audio device which 

has a four-digit PIN code

     1.   Using  the  audio  control  dial,  select 

the pairing mode “ PAIR DEVICE ” 
in the “ BT SETUP ” mode. (Refer to 
“Bluetooth

®

  audio device set-up” for 

details.)

   2.   Press the audio control dial to 

determine the mode. After “ ENTER 
PIN ” is displayed on the audio display 
for three seconds, “ PIN 0000 ” is 
displayed and the PIN code can be 
input.

   3.   Input the PIN code of your Bluetooth 

®

audio device by pressing channel preset 
buttons 1 to 4 while “ PIN 0000 ” is 
displayed.

Press channel preset button 1 to input 
the fi rst digit, 2 for the second, 3 for the 
third, and 4 for the forth. For example, 
if the PIN code were “4213” press 
channel preset button 1 four times (1, 
2, 3, 4), button 2 twice (1, 2), button 
3 once (1), and button 4 three times 
(1, 2, 3). If the “ PIN 0000 ” display 
disappears before fi nishing the PIN 
code input, repeat the procedure from 
Step 1.

   NOTE

  Some devices accept only a particular 
pairing code (Usually, “0000” or 
“1234”).
  If pairing cannot be completed, refer to the 
owner's manual of your mobile device, and 
try those numbers if necessary.

   4.   Press the audio control dial while 

the input PIN code is displayed. 
“ PAIRING ”  fl ashes on the audio 
display.

   5.   Operate  the  Bluetooth 

®

  audio device 

and set it to the pairing mode while 
“ PAIRING ”  is  fl ashing.

   6.   When  the  pairing  is  completed,   and 

“ PAIR SUCCESS ” are displayed after 
about 10-30 seconds, after which 
“ PAIR SUCCESS ” continues to be 
displayed for three seconds, and then 
the unit returns to the normal display.