Owner Maintenance; Maintenance and Care; Rear turn signal lights- Page 396

6–52

Maintenance and Care

Owner Maintenance

    (Right  side)

  1.        Make  sure  the  ignition  is  switched  off, 

and the headlight switch is off.

  2.      Turn  the  knob  and  remove  the  cover.

  3.      Turn  the  wing  bolt  and  jack  screw 

counterclockwise.

  4.      Remove  the  jack
  5.      Turn  the  socket  and  bulb  assembly 

counterclockwise and remove it.

  6.      Disconnect  the  bulb  from  the  socket.
   

Rear turn signal lights

Brake lights/Taillights/Rear side-
marker lights

  7.      Install  the  new  bulb.
  8.      Insert the wing bolt into the jack with 

the jack screw pointing to the down 
and turn the wing bolt clockwise to 
temporarily tighten it.