Owner Maintenance; Maintenance and Care; R em ov al- Page 397

6–53

Maintenance and Care

Owner Maintenance

  9.      Turn  the  jack  screw  in  the  direction 

shown in the fi gure.

  10.       Turn  the  wing  bolt  completely  to 

secure the jack.

   NOTE

  If the jack is not completely secured, it 
could rattle while driving. Make sure the 
jack screw is suffi ciently tightened.

  11.      Install the cover in the reverse order of 

the removal procedure.

  12.      Insert the cover tabs and install the 

cover.

   NOTE

  Verify that the cover is securely installed.

    Reverse  lights

    4–Door

     1.   Make  sure  the  ignition  is  switched  off, 

and the headlight switch is off.

   2.   Pull the center of each plastic retainer 

and remove the retainers.

   3.   Peel back the trunk lid trim.

R em ov al

In s t allat ion

   4.   Disconnect  the  electrical  connector 

from the bulb by pressing the tab on the 
connector with your fi nger and pulling 
the connector.

   5.   Turn the socket and bulb assembly 

counterclockwise and remove it.