Owner Maintenance; Maintenance and Care; R em ov al- Page 399

*

Some models.

6–55

Maintenance and Care

Owner Maintenance

  License  plate  lights

    4–Door

     1.   Make  sure  the  ignition  is  switched  off, 

and the headlight switch is off.

   2.   Pull the center of each plastic retainer 

and remove the retainers.

   3.   Peel back the trunk lid trim.

R em ov al

In s t allat ion

   4.   Turn the socket and bulb assembly 

counterclockwise and remove it.

   5.   Disconnect the bulb from the socket.

   6.   Install the new bulb in the reverse order 

of the removal procedure.

  5–Door

     1.   Make  sure  the  ignition  is  switched  off, 

and the headlight switch is off.

   2.   Wrap  a  fl athead screwdriver with a soft 

cloth to prevent damage to the lens, 
and then remove the lens by carefully 
prying on the edge of the lens with a 
fl athead screwdriver.

   3.   Disconnect the bulb by pulling it out.

   4.   Install the new bulb in the reverse order 

of the removal procedure.

 Replacing Interior Light Bulbs

    Overhead  lights  (Front)/Map  lights 

*

 , 

Overhead lights (Front) 

*

 ,  Overhead 

lights (Rear) 

*

 , Vanity mirror lights 

*

     1.   Wrap  a  small  fl athead screwdriver 

with a soft cloth to prevent damage to 
the lens, and then remove the lens by 
carefully prying on the edge of the lens 
with the fl athead screwdriver.