When Driving; How to set the speed; Indication on multi-information- Page 270

When the MRCC switch is pressed once, the MRCC with Stop & Go function system turns
on, and the MRCC with Stop & Go function standby indication (white) turns on and the
vehicle speed and the distance between the vehicles while in headway control can be set.

In addition, the MRCC with Stop & Go function system display indication is displayed on
the multi-information display and the active driving display at the same time.

NOTE



If the ignition is switched off while the MRCC with Stop & Go function system is
operating, the system will be operable when the ignition is switched ON the next time.



Stop the headway control function to switch the system to the cruise control function.
Refer to the Settings section in the Mazda Connect Owner's Manual.

How to set the speed

Adjust the vehicle speed to the desired setting using the accelerator pedal and press the RES
switch up (SET+) or down (SET-) to start headway control.
The set speed is indicated on the display. At the same time, the MRCC standby indication
(white) changes to the MRCC set indication (green).

Travel status

Indication on multi-information

display

Indication on active driving dis‐

play

During travel at constant speed

During travel under headway con‐
trol

When Driving

i-ACTIVSENSE

4-130

Mazda3_8HE9-EA-18K_Edition3

2018-11-21 14:31:58