When Driving; Changing the Set Vehicle Speed; To accelerate/decelerate using the RES- Page 273

Changing the Set Vehicle Speed

To accelerate/decelerate using the RES
switch

When the RES switch is pressed up (SET
+), the vehicle accelerates and when the
RES switch is pressed down (SET-), it
decelerates.



Press and release immediately: 1 km/h
(1 mph)



Press and hold: 10 km/h (5 mph)

To increase speed using accelerator
pedal

Depress the accelerator pedal and press the
RES switch up (SET+) or down (SET-) at
the desired speed. If the switch is not
operated, the system returns to the set
speed after you release your foot from the
accelerator pedal.

NOTE



The warnings and brake control do not
operate while the accelerator pedal is
depressed.

Canceling the system

When the following operations are
performed, the MRCC with Stop & Go
function system is canceled, and the
MRCC with Stop & Go function set
indication (green) switches to the MRCC
with Stop & Go function standby
indication (white) at the same time.



The CANCEL switch is pressed.



The brake pedal is depressed.



The selector lever is in the P (Park), N
(Neutral), or R (Reverse) position.

Under the following conditions, the
MRCC with Stop & Go function cancel
indication is displayed in the
multi-information display and a single
beep sound is heard.



The DSC has operated.



The Smart Brake Support (SBS) has
operated.



When traveling on a downslope for a
long period of time.



There is a problem with the system.



The parking brake is automatically
applied during stop hold control.



The front radar sensor cannot detect
target objects (during rain, fog, snow or
other inclement weather conditions, or
when the radiator grille is dirty).



The parking brake is applied.



Any of the doors is opened.



The driver's seat belt is unfastened.

Resuming control

If the MRCC with Stop & Go function
system is canceled, you can resume
control at the previously set speed by
pressing the RES switch and after all of
the operation conditions have been met.

NOTE

If the set speed is not indicated in the
display, the control does not resume even
if the RES switch is pressed.

Turning off the system

When the MRCC switch is pressed while
the MRCC is operating, the MRCC turns
off.

When Driving

i-ACTIVSENSE

4-133

Mazda3_8HE9-EA-18K_Edition3

2018-11-21 14:31:58