Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) (Automatic Transmi ...; Mazda Radar Cruise; When Driving- Page 264

NOTE

If the set speed is not indicated in the
display, the control does not resume even
if the RES switch is pressed.

Turning off the system

When the MRCC switch is pressed while
the MRCC is operating, the MRCC turns
off.

▼

Shift-up/Shift-down Request Display

The shift-up or shift-down request display
might be displayed while the MRCC is
operating. When this occurs, shift gears
because the gear position is not
appropriate.

Request

Indication on display

Shift up

Shift Up to a Higher Gear

Shift down

Shift Down to a Lower Gear

NOTE



If the gears are not shifted up even
though the shift-up request indication is
displayed, load will be applied to the
engine and the MRCC might be
automatically canceled or engine
damage could occur.



If the gears are not shifted down even
though the shift-down request indication
is displayed, the MRCC might be
automatically canceled or engine
stalling could occur.

Mazda Radar Cruise

Control with Stop & Go

function (MRCC with Stop
& Go function) (Automatic

Transmission)

*

▼

Mazda Radar Cruise Control with
Stop & Go function (MRCC with
Stop & Go function)

The MRCC with Stop & Go function
system is designed to maintain headway
control

*1

 with a vehicle ahead according

to your vehicle's speed using a front radar
sensor to detect the distance to the vehicle
ahead and a preset vehicle speed without
you having to use the accelerator or brake
pedals.

*

1 Headway Control: Control of the

distance between your vehicle and the
vehicle ahead detected by the Mazda
Radar Cruise Control (MRCC)
system.

Additionally, if your vehicle starts closing
in on the vehicle ahead such as if the
vehicle ahead brakes suddenly, a warning
sound and a warning indication in the
display are activated simultaneously to
alert you to maintain a sufficient distance
between the vehicles.
If the vehicle ahead stops while you are
following behind it, your vehicle will stop
and be held stopped automatically (stop
hold control), and headway control will
resume when you resume driving the
vehicle such as by pressing the RES
switch.
Also refer to the following before using
the MRCC with Stop & Go function.

When Driving

i-ACTIVSENSE

4-124

*Some models.

Mazda3_8HE9-EA-18K_Edition3

2018-11-21 14:31:58