Owner Maintenance; Daytime running lights/Parking lights; Front turn signal lights/Front- Page 428

4. Remove the windshield washer fluid

reservoir and bolts.

Windshield washer 
fluid reservoir

Bolt

Guide

5. Remove the guide.

Guide

6. Disconnect the connector from the unit

by pressing the tab on the connector
with your finger and pulling the
connector downward.

7. Turn the socket and bulb assembly to

remove it. Carefully remove the bulb
from its socket in the reflector by
gently pulling it straight backward out
of the socket.

8. Install the new bulb in the reverse

order of the removal procedure.

Daytime running lights/Parking lights
(With LED headlights), Signature wing
illumination

*

The LED bulb cannot be replaced as a
single unit because it is an integrated unit.
The LED bulb has to be replaced with the
unit. We recommend an Authorized
Mazda Dealer when the replacement is
necessary.

Front turn signal lights/Front
side-marker lights, Parking lights (With
halogen headlights)

1. Make sure the ignition is switched off,

and the headlight switch is off.

2. If you are changing the right bulb, start

the engine, turn the steering wheel all
the way to the left, and turn off engine.
If you are changing the left bulb, turn
the steering wheel to the right.

Maintenance and Care

Owner Maintenance

6-46

*Some models.

Mazda6_8FH2-EA-16F_Edition4

2017-4-10 11:03:49