Dynamic Stability Control (DSC); Dynamic Stability Control; When Driving- Page 182

Dynamic Stability Control

(DSC)

The Dynamic Stability Control (DSC)
automatically controls braking and engine
torque in conjunction with systems such as
ABS and TCS to help control side slip
when driving on slippery surfaces, or
during sudden or evasive maneuvering,
enhancing vehicle safety.
 
Refer to ABS (page 4-64) and TCS (page
4-65).
 
DSC operation is possible at speeds
greater than 20 km/h (12 mph).
 
The warning light turns on when the
system has a malfunction.
Refer to Warning Indication/Warning
Lights on page 4-26.

WARNING

Do not rely on the Dynamic Stability
Control as a substitute for safe driving:

The Dynamic Stability Control (DSC)
cannot compensate for unsafe and reckless
driving, excessive speed, tailgating
(following another vehicle too closely), and
hydroplaning (reduced tire friction and
road contact because of water on the road
surface). You can still have an accident.

CAUTION



The DSC may not operate correctly
unless the following are observed:



Use tires of the correct size specified for
your Mazda on all four wheels.



Use tires of the same manufacturer,
brand and tread pattern on all four
wheels.



Do not mix worn tires.



The DSC may not operate correctly when
tire chains are used or a temporary spare
tire is installed because the tire diameter
changes.

▼

TCS/DSC Indicator Light

This indicator light stays on for a few
seconds when the ignition is switched ON.
If the TCS or DSC is operating, the
indicator light flashes.
 
If the light stays on, the TCS, DSC or the
brake assist system may have a
malfunction and they may not operate
correctly. Take your vehicle to an
Authorized Mazda Dealer.

When Driving

ABS/TCS/DSC

4-66

MX-5_8GF7-EA-17J_Edition2

2017-10-31 14:07:27