Owner Maintenance; Maintenance and Care; Brake lights/Taillights, Rear turn signal - Page 237

8-35

Maintenance and Care

Owner Maintenance

Form No. 8S15-EA-03G

Brake lights/Taillights, Rear turn signal 
lights, Reverse lights

1. Pull the center section of the plastic 

retainer and remove the retainers and 
remove the trunk end trim.

2. Turn the socket and bulb assembly 

counterclockwise and remove it.

3. Disconnect the bulb from the socket.

4. Install the new bulb in the reverse order 

of removal.

High-mount brake light

1. Turn the socket and bulb assembly 

counterclockwise and remove it.

2. Remove the bulb by pushing it in 

slightly and turning it 
counterclockwise.

3. Install the new bulb in the reverse order 

of removal.

License plate lights/Trunk lights

1. Slide the unit as shown in the figure to 

remove it.

2. Turn the socket and bulb assembly 

counterclockwise and remove it.

3. Disconnect the bulb from the socket.

Trunk end trim

Removal

Installation

    Rear turn signal lights
    Brake lights/Taillights
    Reverse lights

Socket

Socket

Socket

J07S_8S15-EA-03G_Edition2.book  Page 35  Thursday, August 21, 2003  10:04 AM