Owner Maintenance; Maintenance and Care; of the same rating.- Page 239

8-37

Maintenance and Care

Owner Maintenance

Form No. 8S15-EA-03G

3. Pull the fuse straight out with the fuse 

puller provided on the fuse panel.

4. Inspect it and replace if it’s blown.

5. Push in a new fuse of the same rating, 

and make sure it fits tightly. If it 
doesn’t, have an Authorized Mazda 
Dealer install it.
If you have no spare fuses, borrow one 
of the same rating from a circuit not 
essential to vehicle operation, such as 
the RADIO circuit.

If the headlights or other electrical 
components don’t work and the fuses in 
the cabin are OK, inspect the fuse block 
under the hood. If a fuse is blown, it must 
be replaced. Follow these steps:

1. Turn off the ignition switch and all 

other switches.

2. Remove the fuse block cover.

3. If a fuse is blown, replace it with a new 

one 

of the same rating.

Always replace a fuse with one of the 
same rating. Otherwise you may 
damage the electric system.

Fuse puller

Normal

Blown

CAUTION

NOTE

To replace the MAIN fuse, contact an 
Authorized Mazda Dealer (page 8-38).

Fuse block cover

Tab

Normal

Blown

J07S_8S15-EA-03G_Edition2.book  Page 37  Thursday, August 21, 2003  10:04 AM