Owner Maintenance; Replacing Interior Light Bulbs; Fuse Replacement- Page 238

8-36

Maintenance and Care

Owner Maintenance

Form No. 8S15-EA-03G

4. Install the new bulb in the reverse order 

of removal.

▼

Replacing Interior Light Bulbs

Overhead light

1. Wrap a flathead screwdriver with a soft 

cloth to prevent damage to the trim and 
gently insert it in the overhead light as 
shown in the figure, and then remove 
the cover.

2. Disconnect the bulb by pulling it out.

3. Install the new bulb in the reverse order 

of removal.

Your vehicle’s electrical system is 
protected by fuses.

If any lights, accessories, or controls don’t 
work, inspect the appropriate circuit 
protector. If a fuse has blown, the inside 
element will be melted.

If the same fuse blows again, avoid using 
that system and consult an Authorized 
Mazda Dealer as soon as possible.

▼

Fuse Replacement

If the electrical system doesn’t work, first 
inspect fuses on the driver’s side.

1. Turn off the ignition switch and other 

switches.

2. Open the fuse panel cover.

Edge

Fuses

Fuse panel cover

J07S_8S15-EA-03G_Edition2.book  Page 36  Thursday, August 21, 2003  10:04 AM