Front seat belt pretensioners; Front seat belt load limiter; Determining if the Personal Safety System™ is operational- Page 84

2008 Mazda Tribute Owners Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

Driver Controls
Locks and Security
Seating and Safety Restraints
Tires, Wheels and Loading
Driving
Maintenance and Specifications
background image

Front seat belt pretensioners

The seat belt pretensioners at the front outboard seating positions are
designed to tighten the seat belts firmly against the occupant’s body
during frontal collisions, and in side collisions and rollovers when the
vehicle is equipped with the side-curtain airbag system. This helps
increase the effectiveness of the seat belts. In frontal collisions, the seat
belt pretensioners can be activated alone or, if the collision is of
sufficient severity, together with the front airbags.

Front seat belt load limiter

The front outboard seat belt load limiter allows webbing to be pulled out
of the retractor in a gradual and controlled manner in response to the
occupant’s forward momentum. This helps reduce the risk of
force-related injuries to the occupant’s chest by limiting the load on the
occupant. Refer to

Load limiter feature

section in this chapter.

Determining if the Personal Safety System™ is operational

The Personal Safety System™ uses a warning light in the instrument
cluster or a back-up tone to indicate the condition of the system. Refer
to the

Warning light

section in the

Instrument cluster

chapter. Routine

maintenance of the Personal Safety System™ is not required.

The Restraints control module (RCM) monitors its own internal circuits
and the circuits for the airbag supplemental restraints, crash sensor(s),
seat belt pretensioners, front seat belt buckle sensors, driver seat
position sensor, and front passenger sensing system. In addition, the
RCM also monitors the restraints warning light in the instrument cluster.
A malfunction with the system is indicated by one or more of the
following.

The warning light will either flash or stay lit.

The warning light will not illuminate immediately after ignition is
turned on.

A series of five beeps will be heard. The tone pattern will repeat
periodically until the problem and warning light are repaired.

If any of these things happen, even intermittently, have the Personal
Safety System™ serviced at an authorized dealer immediately. Unless
serviced, the system may not function properly in the event of a
collision.

2008 Tribute

(j14)

Owners Guide (post-2002-fmt)
USA

(fus)

Seating and Safety Restraints

84