Delayed Headlamp Illumination- Page 109

2-45

Delayed Headlamp Illumination

Delayed headlamp illumination provides a period of
exterior lighting as you leave your vehicle’s area. The
feature is activated when your vehicle’s headlamps are
on due to the automatic headlamp control feature
described previously in this section, and when your
vehicle’s ignition is turned off. Your headlamps will
then remain on until the exterior lamps control is 
moved from OFF to the parking lamp position or 
until a 90 second lighting period has ended.

If you turn off the ignition with the exterior lamps
control in the parking lamp or headlamp position, the
delayed headlamp illumination cycle will not occur.

You can customize the vehicle to activate delayed
headlamp illumination when your vehicle’s ignition 
is turned off under the conditions described above, 
or you may choose not to activate this feature under 
any conditions.

You can turn the feature on and off when you perform
the following sequence:

1. Turn the ignition key to RUN.

2. Close all the doors.

3. Press and hold the power door lock switch. While

holding the door lock switch, cycle the exterior
lamps control on and then off two times.

4. Release the power door lock switch. These steps

must be carried out in a time period of less than 
10 seconds, followed by a delay period of no more
than 10 seconds.

5. Then, press and hold the power door unlock switch.

While holding the door unlock switch, turn the
exterior lamps control on and then off two times.
Release the courtesy door unlock switch. These
operations must be carried out in a time period 
of less than 10 seconds.

After releasing the door unlock switch, a single chime
will be heard if the delayed headlamp illumination
function has been disabled; two chimes will be heard if
the feature has been enabled. Disconnecting the
vehicle’s battery for up to a year will not change the
programmed operation for this feature.