Flash-to-Pass; Daytime Running Lamps (DRL); Automatic Headlamp System- Page 125

2021 Buick enclave Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

02-Seats and Restraints_en_US
04-Instruments and Controls_en_US
08-Driving and Operating_en_US
Driving and Operating
09-Vehicle Care_en_US
background image

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

14637843) - 2021 - CRC - 12/9/20

124

Lighting

This indicator light turns on in the
instrument cluster when the high-beam
headlamps are on.

Flash-to-Pass

This feature is used to signal to the vehicle
ahead that you want to pass.

If the headlamps are off or in the low-beam
position, pull the turn signal lever toward
you to momentarily switch to high beams.

Release the lever to turn the high-beam
headlamps off.

Daytime Running Lamps (DRL)

DRL can make it easier for others to see the
front of your vehicle during the day. Fully
functional DRL are required on all vehicles
first sold in Canada.

The dedicated DRL will come on when all of
the following conditions are met:

.

The ignition is on.

.

The exterior lamp control is in AUTO.

.

The light sensor determines it is daytime.

.

The parking brake is released or the
vehicle is not in P (Park).

The taillamps, instrument panel lights, and
other lamps will not be on.

The DRL turn off when the headlamps are
turned to

O

or the ignition is off. For

vehicles sold in Canada, this control only
works when the vehicle is parked.

Automatic Headlamp System

When the exterior lamp control is set to
AUTO and it is dark enough outside, the
headlamps come on automatically.

There is a light sensor on top of the
instrument panel. Do not cover the sensor;
otherwise the headlamps will come on when
they are not needed.

The system may also turn on the headlamps
when driving through a parking garage or
tunnel.

If the vehicle is started in a dark garage, the
automatic headlamp system comes on
immediately. If it is light outside when the
vehicle leaves the garage, there is a slight
delay before the automatic headlamp
system changes to the Daytime Running
Lamps (DRL). During that delay, the
instrument cluster may not be as bright as
usual. Make sure the instrument panel
brightness control is in the full bright
position. See

Instrument Panel Illumination

Control

0

125

.

When it is bright enough outside, the
headlamps will turn off or may change
to DRL.

The automatic headlamp system turns off
when the exterior lamp control is turned to

O

or the ignition is off.