Identifying Driver Number; Saving Memory Positions; Manually Recalling Memory- Page 47

2020 Buick Encore GX Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

02-Seats and Restraints_en_US
04-Instruments and Controls_en_US
08-Driving and Operating_en_US
09-Vehicle Care_en_US
Vehicle Care
background image

Buick Encore GX Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

14018934) - 2020 - CRC - 2/27/20

46

Seats and Restraints

Identifying Driver Number

To identify the driver number:

1. Move your RKE transmitter

away from the vehicle.

2. Start the vehicle with another

key or RKE transmitter. The
DIC should display the driver
number for the other RKE
transmitter. Turn the vehicle off
and remove the key or RKE
transmitter from the vehicle.

3. Start the vehicle with the initial

key or RKE transmitter. The
DIC should display the driver
number of your RKE
transmitter.

Saving Memory Positions

Read these instructions completely
before saving memory positions.

To save preferred driving positions
1 and 2:

1. Turn the vehicle on or to ACC/

ACCESSORY.

A DIC welcome message may
indicate driver number 1 or 2.

2. Adjust all available memory

features to the desired driving
position.

3. Press and release SET; a beep

will sound.

4. Immediately press and hold the

1 or 2 memory button matching
the above DIC welcome
message until two beeps
sound.

If too much time passes
between releasing SET and
pressing 1, the memory
position will not be saved and
two beeps will not sound.
Repeat Steps 3 and 4.

1 or 2 corresponds to the driver
number. See

Identifying Driver

Number

previously in this

section.

5. Repeat Steps 1

4 for a second

driver using 1 or 2. RKE
transmitters 3

8 will not save

memory positions.

To save the position for

B

and Seat

Exit Memory features, repeat
Steps 1

4 using

B

. This saves the

position for getting out of the
vehicle.

Save preferred memory feature
positions to both 1 and 2 if you are
the only driver.

Manually Recalling Memory
Positions

Press and hold 1, 2, or

B

to recall

the previously saved memory
positions if you are driver 1 or 2
identified in the DIC welcome
message.

To stop Manual Memory recall
movement, release 1, 2, or

B

or

press any of the following controls:

.

Power seat

.

Memory SET

.

Power mirror, with the driver or
passenger side mirror selected

.

Power steering wheel,
if equipped

Detailed Information for 2020 Buick Encore GX Owner Manual

Lists of information found in 2020 Buick Encore GX Owner Manual - Page 47

  • 1. Move your RKE transmitter away from the vehicle.
  • 2. Start the vehicle with another key or RKE transmitter.
  • 3. Start the vehicle with the initial key or RKE transmitter.
  • 1. Turn the vehicle on or to ACC/ ACCESSORY.
  • 2. 2.
  • 3. Press and release SET; a beep will sound.
  • 4. Immediately press and hold the 1 or 2 memory button matching the above DIC welcome message until two beeps sound.
  • 4. 1 or 2 corresponds to the driver number.
  • 5. Repeat Steps 1 – 4 for a second driver using 1 or 2.

Related Documents for 2020 Buick Encore GX Owner Manual