Replacing LATCH System Parts After a Crash; Seats and Restraints; Replacing LATCH System- Page 97

2019 Buick LaCrosse Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

01-In Brief_en_US
03-Seats and Restraints_en_US
05-Instruments and Controls_en_US
09-Driving and Operating_en_US
Driving and Operating
10-Vehicle Care_en_US
Vehicle Care
background image

Buick LaCrosse Owner Manual (GMNA-Localizing-U.S./Canada-12032549) -

2019 - crc - 8/20/18

96

Seats and Restraints

2. Press both buttons on the head

restraint posts at the same
time, and pull up on the head
restraint.

3. Store the head restraint in the

trunk of the vehicle.

4. When the child restraint is

removed, reinstall the head
restraint before the seating
position is used.

{

Warning

With head restraints that are not
installed and adjusted properly,
there is a greater chance that
occupants will suffer a neck/
spinal injury in a crash. Do not
drive until the head restraints for
all occupants are installed and
adjusted properly.

To reinstall the head restraint:

1. Insert the head restraint posts

into the holes in the top of the
seatback. The notches on the
posts must face the driver side
of the vehicle.

2. Push the head restraint down.

If necessary, press the height
adjustment release button to
further lower the head restraint.
See

Head Restraints

0

53

.

3. Try to move the head restraint

to make sure that it is locked in
place.

Replacing LATCH System
Parts After a Crash

{

Warning

A crash can damage the LATCH
system in the vehicle. A damaged
LATCH system may not properly
secure the child restraint,
resulting in serious injury or even
death in a crash. To help make
sure the LATCH system is

(Continued)

Detailed Information for 2019 Buick LaCrosse Owner Manual

Lists of information found in 2019 Buick LaCrosse Owner Manual - Page 97

  • 2. Press both buttons on the head restraint posts at the same time, and pull up on the head restraint.
  • 3. Store the head restraint in the trunk of the vehicle.
  • 4. When the child restraint is removed, reinstall the head restraint before the seating position is used.
  • 1. Insert the head restraint posts into the holes in the top of the seatback.
  • 2. Push the head restraint down.
  • 3. Try to move the head restraint to make sure that it is locked in place.