Delayed Locking; Perimeter Lighting; Exterior Lights- Page 145

yellow

blue     

2-88

Delayed Locking

The delayed locking feature, which delays the actual locking 
of the vehicle, can be made active or inactive through 
the DIC. When DELAYED LOCKING 

-

 OFF 

-

 ON appears 

on the display, use the ENG/MET button to toggle the arrow 
between OFF and ON. When you have made your choice, 
press the RESET button to record your selection.

For more information on this feature, see “Delayed
Locking” in the Index.

Perimeter Lighting

When the button with the unlock symbol on the
transmitter is pressed, the Daytime Running Lamps
(high

-

beams at reduced intensity), parking lamps and

back

-

up lamps will turn on if it is dark enough

according to the Twilight Sentinel

R

.

You can control activation of this feature by choosing
OFF or ON when the PERIMETER LIGHTS choice is
displayed on the DIC. Make your choice by pressing the
ENG/MET button and record your choice by pressing
the RESET button. You will then be prompted to choose
a TIMEOUT period. See “Exterior Lights” later in this
section for more information.

For more information on this feature, see “Perimeter
Lighting” in the Index.

Exterior Lights

The EXTERIOR LIGHTS/TIMEOUT feature can be
changed to desired setting by using the ENG/MET to
toggle from 5 to 30 seconds. Each toggle will increase
the time by 5 seconds. Once the desired timeout is
displayed, press RESET to record your choice and move
on to the next personal choice feature.

Memory Seat Recall

This feature recalls the position of your seat. When this
feature is active, the memory seat and mirror positions
will be recalled for the identified driver when the remote
keyless entry transmitter is used to enter the vehicle.

You can program this feature to be active by choosing
ON when the SEAT RECALL choice appears, or
inactive by choosing OFF when the SEAT RECALL
choice appears on the DIC. Make your choices by
pressing the ENG/MET button and store them to
memory by pressing the RESET button.