Front Turn Signal; Cornering Lamps; Trunk-Mounted Back-Up and Taillamps- Page 297

yellow

blue     

6-38

Front Turn Signal

Once the headlamp assembly has been removed from
the vehicle, the front turn signal bulbs can be accessed.

1. Reach down into the space provided by the removal

of the headlamp assembly and, while pushing in the
tab on the bulb assembly, turn the assembly
counterclockwise and remove it.

2. Remove the old bulb by pulling it straight out 

of the retainer.

3. Replace the bulb and turn the bulb assembly 

back into place.

Cornering Lamps

Follow the same procedure as used for replacing the
headlamps. However, to remove the cornering lamp
bulb, press the tab on the bulb assembly while turning
the bulb assembly counterclockwise. Pull the bulb
straight out. Replace the bulb and turn the bulb assembly
back into place.

Trunk-Mounted Back-Up and Taillamps

1. Loosen and remove the seven fasteners that hold the

assembly in place. The assembly for both sides is
one piece. The entire piece must be removed to
replace any bulbs.