Windshield Wiper Controls; Lamp Controls; Interior Lamps- Page 10

Turn Signal/Multifunction Lever

Windshield Wiper Controls

MIST

Turn the WIPER band toward you and

release it for a single wipe cycle. For

more cycles, hold the band on MIST

longer.

WASH

Push the washer PUSH tab to spray

washer solvent on the windshield.

The headlamps, parking and backup

lamps will illuminate when you press the

unlock symbol (      ) on the keyfob 

transmitter.

See Section 3 of your Owner Manual.

Getting to Know Your LeSabre

10

Lamp Controls

Interior Lamps

See Section 3 of your Owner Manual for

interior lamp operating instructions.

Daytime Running Lamps

The Daytime Running Lamps will come

on when the ignition is on, the headlamp

switch is OFF, and the transaxle is not in

Park (P).

Twilight Sentinel

This feature automatically switches the

headlamps on and off by sensing how

dark it is outside. You should not have to

manually turn the headlamps on or off. 

The Twilight Sentinel control lever is

located to the left of the steering 

column. To operate it, slide the lever

from OFF to MAX to adjust the 

headlamps ON time from a few seconds

to three minutes, after the ignition has

been turned OFF.

Perimeter Lighting

Notice: Driver #1 and Driver #2 key 

fob settings are unique. Refer to DIC

Programming.