Note: ; To Save Memory Settings; Easy Exit Seat- Page 14

Getting to Know Your Lucerne

14

Starting the Vehicle

1. Aim the transmitter at the vehicle.

2. Press and release the Lock button on

the transmitter.

3. Immediately press and hold the

Remote Start button for about four

seconds.

4. When the vehicle starts, the parking

lamps will light and remain on while

the engine is running and the doors

will lock.

5. Repeat these steps for a 10-minute

time extension.

When you enter the vehicle after a

remote start, the key must be inserted in

the ignition and turned to the Run posi-

tion before driving.

Canceling a Remote Start

If you wish to turn off the engine instead

of driving after a remote start, perform

one of the following functions:

• Press and hold the  (Remote Start)

button until the parking lamps turn off.

• Press and release the Hazard

Warning Flashers button inside the

vehicle. Press the button again to

turn off the flashers.

• Turn the key in the ignition switch to

the Run position and then Off.

• The engine will automatically stop

when time expires.

See Section 2 of your Owner Manual.

Note: If the Check Engine light is illumi-

nated on the instrument panel cluster,

Remote Vehicle Start cannot be used.

See your dealer for the proper repairs.

Memory Settings (if equipped)

The memory buttons are located on the

driver’s door. Settings can be pro-

grammed for the driver’s seat, outside

mirrors and the climate controls for two

drivers.

To Save Memory Settings

1. Adjust the driver’s seat and outside 

mirrors to a comfortable position.

Select the desired climate control

temperature, fan speed and airflow

mode for the driver and front 

passenger.

2. Press and hold button 1 or 2 until two

beeps sound.

Repeat these steps for a second driver.

To recall the settings, press memory but-

ton 1 or 2 with the vehicle in Park.

Easy Exit Seat

The easy exit seat button is located

between the two memory buttons. Press

the exit button, with the vehicle in Park,

to recall the exit position for the driver’s

seat.

See Section 2 of your Owner Manual.

Lucerne06Beta6.qxd  9/8/05  9:04 PM  Page 14