Turn Signal On Chime; Headlamp High/Low Beam Changer- Page 95

yellow

blue     

2-37

An arrow on the 
instrument panel will flash
in the direction of the turn
or lane change.

If your vehicle is equipped with the Head

-

Up Display

(HUD), an arrow will also appear in the display area to
indicate the direction of the turn or lane change.

To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by
itself when you release it.

As you signal a turn or a lane change, if the arrows flash
at twice the normal rate, this may indicate that a signal
bulb may be burned out and other drivers won’t see your
turn signal.

If a bulb is burned out, replace it to help avoid an
accident. If the arrows don’t go on at all when you
signal a turn, check the fuse (see “Fuses and Circuit
Breakers” in the Index) and for burned

-

out bulbs.

If you have a trailer towing option with added wiring 
for the trailer lamps, the signal indicator will flash even
if a turn signal bulb is burned out. Check the front 
and rear turn signal lamps regularly to make sure 
they are working. Note: You do not need to add a
different flasher.

Turn Signal On Chime

If your turn signal is left on for more than 3/4 of a mile
(1.2 km), a chime will sound at each flash of the turn
signal. To turn off the chime, move the turn signal lever
to the off position.

Headlamp High/Low Beam Changer

To change the headlamps from low beam to high or 
high to low, pull the turn signal lever toward you, then
release it.

When the high beams 
are on, a light on the
instrument panel will also
be on. If your vehicle is
equipped with HUD, this
light will also appear in the
display area.